This sensor measures temperature using a DS-2438Z with an operating range of -40°C to +85°C. It is not calibrated, but empirical data proves it to be accurate within a few degrees of actual temperature. The sensing device is partially enclosed and mounted to the rubber tubing attachment, so the time to respond to temperature change will be relatively slow. The sensor should not be placed in direct sunlight, as the radiant heat will become trapped inside the enclosure and will cause higher readings.

The MS-TPD can be used as either an airflow sensor or a pressure sensor. The output barbs from the sensor can be “relocated” through the use of plastic tubing. This will allow the device to measure the input/output volume of air handling units and/or to monitor pressure differentiation from inside a computer room to the outside. In addition, the MS-TPD will report the temperature of its environment.

The sensor needs 12 volts to be supplied on the cable in order to work properly. It can either be used with a LinkHub, which will supply 12 VDC via the HubPwr5, or with a MS-PWR when using a LinkUSB/LinkUSBi or a Link45/Link45i. This product is also compatible with AEM systems.

The MS-TPD uses the Omron flow sensor, model D6F-P0010A.

For more information on this product, refer to the MultiSensor manual.

This product is RoHS compliant.

Want to learn more about how iButtonLink can work with your business? Check out our Business to Business page!